Category Archives: Pibot

Lego Pibot Ultrasonic wall avoider

I have been working on getting the cheap ultrasonic sensor working for the past week and have got it working with my Lego Pibot.

It sends out an ultrasonic blip every 0.1 seconds and measures the time it takes for it to get a bouce back.

I followed a very helpful guide at raspberry spy which I got a lot of the ideas from.

http://www.raspberrypi-spy.co.uk/2012/12/ultrasonic-distance-measurement-using-python-part-1/

Raspberry Pi camera board – Gstreamer

So, my Raspberry Pi camera board has arrived and I have started playing with it.

Raspberry Pi camera board

My first impressions were tiny, super cheap camera. Its low light capabilities are not great but I can live with that. The important bit is the quality, full 1080p at 25 frames per second (UK). That on its own is pritty awesome.

I was though only really interested in getting the pi to work remotely for my robot to replace the 3-4 fps standard def USB webcam I currently use. Currently though with the camera, there is no V4L driver so we have to make do with their provided applications then pipe it out to streaming applications. Their recommended method is slow and very laggy (netcat and mplayer with wifi provides 3-6 seconds of lag). So I had to find another option. I happened to be sitting on the #raspberrypi IRC on freenode and heard a user having success with gstreamer. So this is how to set up gstreamer to stream HD video with less than 0.5 seconds of lag.

First we need to add a repositary with gstreamer1.0

 

sudo nano /etc/apt/sources.list

 

and add to the end

 

deb http://vontaene.de/raspbian-updates/ . main

 

Then do an sudo apt-get update

next grab gstreamer

 

sudo apt-get install gstreamer1.0

 

 

On your recieving end you will also need gstreamer. Because I mainly use a mac, I decided to get it working on the mac so with help from arcanescu on IRC, we figured out how to get it working on mac os (10.8)

The simplest way is with brew, a package manager like apt-get, but for mac os. To install it run this in terminal on your mac simply run

ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

It will grab and install brew. Now update it with

 

brew update 

 

Now we need to grab gstreamer

 

 brew install gstreamer gst-libav gst-plugins-ugly gst-plugins-base gst-plugins-bad gst-plugins-good 

 

Once that installs you should be good to go. Enter

 

 raspivid -t 999999 -h 720 -w 1080 -fps 25 -hf -b 2000000 -o - | gst-launch-1.0 -v fdsrc ! h264parse !  rtph264pay config-interval=1 pt=96 ! gdppay ! tcpserversink host=YOUR-PI-IP-ADDRESS port=5000 

 

on your raspberry pi and enter on your mac

 

 gst-launch-1.0 -v tcpclientsrc host=YOUR-PI-IP-ADDRESS port=5000  ! gdpdepay !  rtph264depay ! avdec_h264 ! videoconvert ! autovideosink sync=false 

 

The picture quality is good but I see a number of flickers which isnt a problem for me, if it is for you, maybe try adjusting the resolution

 

So thanks again to arcanescu, I take no credit for this as it was him that came up with this, if you ever see him in IRC, give him a virtual pat on the back

His blog garagedeveloper.wordpress.com

Lego Pibot revision 0.2

 

I have been working away at my Lego Pibot recently and now have something to show for it.

I rebuilt the entire thing making it more efficient in turning, it uses a towering design and is more modular. It has 4 levels with batteries, pi, breadboard and camera.

It also has support for an additional attachment on the front, so far I have used that to attach a lift-able pen on the front to draw over paper (turtle style). Finally I have added space for a breadboard and also added the extra motor for rotating the webcam.

All the electronics are the same as the first Lego Pibot with the exception of the additional motor and the breadboard for prototyping. i have also added a cheap ultrasonic sensor off eBay to it but am having issues with it right now.

What isn’t shown in the video is the wiimote support I have added. I have written an additional script for controlling the robot with Bluetooth using a wiimote.

When it is finished I will post the source code, as normal, it is in python.

Also new is the addition of scratch controlling. The robot can be really easily controlled by scratch GPIO making it really simple to write control programs.

 

As normal, if you have any questions on this, post a comment below or on the video.